Window Technical Support

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Thursday, 25 April 2013

IP Address

Posted on 04:51 by Unknown

IP Address

      

1. Short for Internet Protocol, IP is an address of a computer or other network device on a network using IP or TCP/IP. For example, the number "166.70.10.23" is an example of such an address. These addresses are similar to an addresses used on a house and is what allows data to reach the appropriate destination on a network and the Internet.
There are five classes of available IP ranges: Class A, Class B, Class C, Class D and Class E, while only A, B, and C are commonly used. Each class allows for a range of valid IP addresses. Below is a listing of these addresses.
Class Address Range Supports
Class A 1.0.0.1 to 126.255.255.254 Supports 16 million hosts on each of 127 networks.
Class B 128.1.0.1 to 191.255.255.254 Supports 65,000 hosts on each of 16,000 networks.
Class C 192.0.1.1 to 223.255.254.254 Supports 254 hosts on each of 2 million networks.
Class D 224.0.0.0 to 239.255.255.255 Reserved for multicast groups.
Class E 240.0.0.0 to 254.255.255.254 Reserved for future use, or Research and Development Purposes.
Ranges 127.x.x.x are reserved for the loopback or localhost, for example, 127.0.0.1 is the common loopback address. Range 255.255.255.255 broadcasts to all hosts on the local network.
IP address breakdown
Every IP address is broke down into four sets of octets that break down into binary to represent the actual IP address. The below table is an example of the IP 255.255.255.255. If you are new to binary, we highly recommend reading our binary and hexadecimal conversions section to get a better understanding of what we're doing in the below charts.
IP: 255 255 255 255
Binary value: 11111111 11111111 11111111 11111111
Octet value: 8 8 8 8
If we were to break down the IP "166.70.10.23", you would get the below value. In the below table, the first row is the IP address, the second row is the binary values, and the third row shows how the binary value equals the section of the IP address.
166 70 10 23
10100110 01000110 00001010 00010111
128+32+4+2=166 64+4+2=70 8+2=10 16+4+2+1=23
Automatically assigned addresses
There are several IP addresses that are automatically assigned when you setup a home network. These default addresses are what allow your computer and other network devices to communicate and broadcast information over your network. Below is the most commonly assigned network addresses in a home network.
192.168.1.0 0 is the automatically assigned network address.
192.168.1.1 1 is the commonly used address used as the gateway.
192.168.1.2 2 is also a commonly used address used for a gateway.
192.168.1.3 - 254 Addresses beyond 3 are assigned to computers and devices on the network.
192.168.1.255 255 is automatically assigned on most networks as the broadcast address.
If you have ever connected to your home network, you should be familiar with the gateway address or 192.168.1.1, which is the address you use to connect to your home network router and change its settings.
Getting an IP address
By default the router you use will assign each of your computers their own IP address, often using NAT to forward the data coming from those computers to outside networks such as the Internet. If you need to register an IP address that can be seen on the Internet, you must register through InterNIC or use a web host that can assign you addresses.
Anyone who connects to the Internet is assigned an IP address by their Internet Service Provider (ISP) who has registered a range of IP addresses. For example, lets assume your ISP is given 100 addresses, 109.145.93.150-250. This means the ISP owns addresses 109.145.93.150 to 109.145.93.250 and is able to assign any address in that range to its customers. So, all these addresses belong to your ISP address until they are assigned to a customers computer. In the case of a dial-up connection, you are given a new IP address each time you dial into your ISP. With most broadband Internet service providers because you are always connected to the Internet your address rarely changes and will remain the same until the service provider requires it to be changed.
Connecting to the Internet
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Posted in | No comments
Newer Post Older Post Home

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts

  • Block IP address with Windows Firewall 2008
    If you ever feel that someone may be trying to break into your server or know an IP address that you want to block from accessing ...
  • Windows Server 2008 Command-line Tool
    On an installed and running system the Windows command-prompt window may be accessed from the main panel of the Start menu. The command-pro...
  • Creating a Capture Image in WDS
    How to Create a Capture Image by Using WDS Console " A capture image is created from an existing boot image. You will create a new ca...
  • Configuring Windows Server 2008 Remote Desktop Administration
    Windows Server 2008 is, as the name suggests, a server operating system. In the real world this means that systems running Windows Server ...
  • SMTP Server Configure on Windows Server 2008 R2
    Installing the SMTP feature 1 . Click Start > Run and then enter servermanager.msc in the Open dialogue box then click OK to load Se...
  • Windows Deployment Services Configure in Windows Server 2008 r2
    How to use Windows Deployment Service  1.1 Introduction: Windows Deployment Service (WDS) is an enhanced and redesigned version of Remote I...
  • How to configure ftp server in windows
      FTP Server using IIS 7.0 and Windows Server 2008 Open Server Manager, go to Roles and click “Add Roles” In the Add Role Wizard, select Web...
  • configure Active Directory in Windows Server 2008 R2 Part-2
    Configure Active Directory At the Server Management screen you should now see that you have 1 role installed.  The Active Directory D...
  • VPN connection Configuring on server 2008 R2 using RRAS and configuring clients
    A virtual private network (VPN) is a network that uses a public telecommunication infrastructure, such as the Internet, to provide remote of...
  • FTP Server and its Commands
    What is FTP? The FTP ( F ile T ransfer P rotocol) utility program is commonly used for copying files to and from other computers. These co...

Blog Archive

  • ▼  2013 (91)
    • ►  December (2)
    • ►  November (10)
    • ►  October (5)
    • ►  September (15)
    • ►  August (26)
    • ►  July (1)
    • ►  June (5)
    • ►  May (14)
    • ▼  April (5)
      • IP Address
      • Windows Server 2008 R2 Update Issues and Role Errors
      • Remote Server Administration Tools for Windows 7
      • Install Remote Desktop Web Connection on Windows XP
      • DHCP installation and configuration in windows ser...
    • ►  March (1)
    • ►  February (1)
    • ►  January (6)
Powered by Blogger.

About Me

Unknown
View my complete profile