Window Technical Support

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg

Monday, 30 September 2013

Networking Interview Questions!

Posted on 06:14 by Unknown

Q:What is Networking?
Inter connection between the two or more computers is called the networking. Using three types of network are Intranet, Internet and Extranet (Eg. LAN, WAN & MAN)
Q:What is Bandwidth?
Every line has an upper limit and a lower limit on the frequency of signals it can carry. This limited range is called the bandwidth. Every line has a capacity of transmission of data, The maximum amount of data that can be transferred in a single line is called Bandwidth.
Q:What is VLAN?
VLAN Stand for Virtual Local Area Network. It is a logical grouping of network users and resources connected to administratively defined ports on a switch.
Uses of VLAN are as follows:-
1. It is securied connection.
2. It increases flexibility.
3. It creates separate broadcast domain.

Q:What is CIDR?
CIDR Stands for classless inter domain routing. It helps in preventing the wasting of IP address and nowadays we are facing the shortage of the IP address.So this CIDR helps to prevent the waste of IP address.Shortly IPV6 will come into exist.
Q:What is VLSM?
VLSM stands for Variable length subnet mask, when try to separate a major subnet into minor ones, then that process is called VLSM. We can subnet in various lengths.
Eg: 1.1.1.0-/24 can be separated into 1.1.1.0-/30 and 1.1.1.4-/28
Q:What is unicast?
Unicast is one type of transmission in which information is sent from one host to another host (i.e Source to Destination). In another words, Unicast transmission is between one-to-one nodes

Unicast ---> A transmission to a single interface card.

Q:What is Multicast?
Multicast is such differ from Unicast. It is another type of transmission or communication in which there may be more than host and the information sent is meant for a set of host.(i.e one source to group of destination

Multicast ---> A transmission to a group of interface cards on the network.

Q:What is Broadcast?
Broadcast is one type of transmission in which information is transfer from just one host but is received by all the host connected to the network. (i.e one source to all destination)

Broadcast ---> A transmission to all interface cards on the network.
 
 
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Posted in | No comments
Newer Post Older Post Home

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Popular Posts

  • Disable Shutdown option in Windows
    This article will walk you through removing the shutdown option from Windows Server 2003/2008 1. Go to Start > Run 2. Type in gpedit.msc ...
  • Adding Host (A) DNS Records in Windows Server 2008 R2
    About DNS Records Since DNS server plays an important role when it comes to keeping the network up and accessible, it becomes important for...
  • Technical Interview Questions - Windows Server 2008/R2 Hyper-V and Virtualization Part7
    What is virtualization (in general)? What are the 4 major virtualization areas? Describe the major benefits of Server Virtualization. What i...
  • RAID 2, RAID 3, RAID 4, RAID 6 Explanation
    In most critical production servers, you will be using either RAID 5 or RAID 10 . However there are several non-standard raids, which are n...
  • How to configure ftp server in windows
      FTP Server using IIS 7.0 and Windows Server 2008 Open Server Manager, go to Roles and click “Add Roles” In the Add Role Wizard, select Web...
  • Transferring FSMO Roles in Windows Server 2008
    Introduction This is a must to read article for any system administrator who administers Microsoft Windows Servers. One of any...
  • Change RDP Port on Windows XP
    The setting for the Terminal Services port lives in the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Termina...
  • SMTP Server Configure on Windows Server 2008 R2
    Installing the SMTP feature 1 . Click Start > Run and then enter servermanager.msc in the Open dialogue box then click OK to load Se...
  • Configuring Windows Server 2008 Remote Desktop Administration
    Windows Server 2008 is, as the name suggests, a server operating system. In the real world this means that systems running Windows Server ...
  • Installing and configuration Distributed File System
    The Distributed File System (DFS) technologies offer wide area network (WAN)-friendly replication as well as simplified, highly available ...

Blog Archive

  • ▼  2013 (91)
    • ►  December (2)
    • ►  November (10)
    • ►  October (5)
    • ▼  September (15)
      • Windows Sever Interview Questions part 2
      • Windows Server 2008 Interview Questions And Answers
      • Networking Interview Questions!
      • Installing and configuration Distributed File System
      • DHCP Step-by-Step Guide
      • Active Directory Certificate Services
      • configure Active Directory in Windows Server 2008 ...
      • Install Active Directory in Windows Server 2008 R2...
      • How to Make a Network Cable
      • Window server 2012 features
      • Configuring Windows Server 2008 Remote Desktop Adm...
      • Windows Server 2008 Command-line Tool
      • VPN connection Configuring on server 2008 R2 using...
      • SMTP Server Configure on Windows Server 2008 R2
      • Secure Sockets Layer (SSL)
    • ►  August (26)
    • ►  July (1)
    • ►  June (5)
    • ►  May (14)
    • ►  April (5)
    • ►  March (1)
    • ►  February (1)
    • ►  January (6)
Powered by Blogger.

About Me

Unknown
View my complete profile